You are not logged in.


Welcome To The Skynix Forums!
If you didn't know, you can use also!
Contact us at!



#1 2018-06-07 11:39:20

Final Prestige
Registered: 2016-03-24
Posts: 3693

Wood floor maintenance may also be harmed

<P>When using geothermal flooring, consumers must pay attention to the gradual heating of floors and floors. When installed, the surface temperature should be maintained at about 18 . Before installation, the concrete floor temperature should be gradually increased by 5  daily until it reaches about 18  so far.</P>
<P>In the first 3 days after the installation is completed, the temperature should be maintained for 3 days before it can be warmed up as needed, and the temperature can only be raised by 5  per day. First use of geothermal heating, attention should be slowly warming. For the first time, the first three days of heating should be gradually warmed: the first day the water temperature is 18 , the next day 25 , the third day 30 , the fourth day can rise to the normal temperature, the water temperature 45 , the surface temperature 28  ~ 30 . Can not heat up too fast, too fast, the floor may be due to swell cracking phenomenon. When geothermal heating system is activated for a long time, it should be heated up strictly according to the heating program as the first time.</P>  "qatar tongue and groove porch flooring,inexpensive way to refresh deck floor,neo composite deck tiles costco "



2018-06-07 11:39:20



Board footer

Powered by FluxBB
Hosted by PunBB-Hosting