You are not logged in.


Welcome To The Skynix Forums!
If you didn't know, you can use also!
Contact us at!



#1 2019-01-24 11:02:55

Prestige 2+
Registered: 2016-10-20
Posts: 1807

What is the cabinet

<p>the cost is relatively high, and it is often used in the kitchen cabinet industry. How to choose the panel of the wardrobe sheet, no matter what sheet, it must be edge-sealed. The quality of the edge willcomposite flooring sheets  affect the service life of the board and the volatilization of harmful substances. In addition, it is necessary to pay attention to whether the edge banding is raised, and the quality of the edge is thick.</p><p> Plate quality For the quality of the plate, it is possible to check whether the Can Composite decking Be Planed To Fit plate is a regular manufacturer through the trademark, and also to see the cross-section of the plate, because the inner material of the good plate is even and fine, the work is exquisite and the quality is good. When the thickness of the sheet is produced, the thickness is of a certain size and is not made casually. Generally, the thickness of the cabinet body is about 18mm, and the back panel and the door panel are generally about 9mm. In order to avoid manufacturers cutting corners, it is best to measure the board spacing. The smaller diy deck panel designs the data gap, the better the board will be.</p>



2019-01-24 11:02:55



Board footer

Powered by FluxBB
Hosted by PunBB-Hosting