You are not logged in.


Welcome To The Skynix Forums!
If you didn't know, you can use also!
Contact us at!



#1 2019-01-16 05:30:11

Prestige 2+
Registered: 2016-10-20
Posts: 1807

fireproof board

<p>The substrate of the decorative panel is a splint, and the sheet is cut into a thin veneer, which is made by gluing, which is a special way of the splint, and the material thickness is 3 mm. It is one of the  attached pergola over deck video  advanced decoration materials. Types and price lists of sheet metal - Blockboard blockboard is also known as the large core board. The material is made of two veneers by adhesive bonding. The price is slightly cheaper than the thin core plate. It is recommended to use the horizontal material because the vertical bending resistance  outdoor cleaning products  is poor, and the lateral bending resistance is higher.</p><p> The main material of particleboard particleboard is wood scrap, which is pressed into the glue additive. Particleboard is divided into two types: extrusion and flat pressing. These plates are the cheapest and have lower strength. MDF MDF is commonly known as fiberboard. The raw material is made of wood fiber  home depot composite decking colors  and added with an adhesive such as urea-formaldehyde resin.</p>



2019-01-16 05:30:11



Board footer

Powered by FluxBB
Hosted by PunBB-Hosting